2 Part Epoxy Wood Filler 1 lb ( 10 Oz ) Natural Resin Putty Wood Replacement Kit

Description

Two-part Epoxy Putty-Filler (or epoxy clay, epoxy sculpt) a Sculpting and Modeling Compound
Color: White and Pink-Brown Creme before mixing,
After Mixing Color:
Very Light Red-Brown
Room temperature curing. No oven or heating needed. Recommended use in 70° F or higher temperatures. Two-part epoxy putty (or epoxy clay, epoxy sculpt, apoxy sculpt, magic sculp). Mix equal parts A & B together until uniform color is obtained, reducing the hardener by small amounts can lengthen the time you have to sculpt or create, too little hardener and it will not harden. Use of gloves is recommended for all.
High tack helps reduce drips and sags while hardening
Can be painted, stained, and machined after fully cured
This epoxy is made from real wood and has many characteristics of wood
PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes
High "wet grab" or tack of PC-Woody makes overhead and sidewall work easy without drip or sag
Excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and chemicals present in pressure-treated wood
Carving, sculpting, embellishing, bonding, filling, building armatures, bases, anchoring nails, screws, rods
Shape by hand/modeling tools
Sand to finish
Finish with all paints, stains, mica powders and more
1 hour working time, 18 hr. cure.
Highly adhesive to most surfaces
Superior detail
No cracking
Hard & Durable
Semi-gloss finish
Waterproof
Non-flammable
Marine & Exterior Quality
Freeze & thaw Stable
Water/soap clean up
Indefinite shelf life
Use on PVC, wood, iron, steel, glass and so much more
Grinding tools on cured material