Conductive Carbon Epoxy Air Dry Electrically Conductive, Carbon 61, 100gm

Description

Technical Product Bulletin
CARBON FILLED ELECTRICALLY CONDUCTIVE EPOXY 100gm
Note: This Product is not to be used for windshield/ Windscreen/ Rear Window repair.
PRODUCT DESCRIPTION:
AA-CARB 61
is an epoxy adhesive and coating formulation based on conductive carbon.
AA-CARB 61
is recommended for electronic bonding and sealing applications that require both fine electrical
and mechanical properties.
AA-CARB 61
cures at room temperature or can be accelerated with mild heat to form a tenacious bond between
similar and dissimilar substrates.
GENERAL PROPERTIES:
Appearance
Black
Cure Type
Heat cure or Room temperature
Benefits
Continuity of conductivity
High adhesion
Wide operating temperature range
Mix Ratio by weight
100:10 / Resin:Hardener
Substrates
Aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, phenolic, G-10 epoxy glass boards
Operating Temperature
-50 to 145 °C
Typical Applications
Electronic bonding and sealing applications that require both fine electrical and mechanical properties.
Shelf Life
6 Months
UNCURED PROPERTIES:
Compressive Strength, psi
13,000
Specific Gravity, mixed
1.35 g/cc
Pot Life
30 minutes
CURE SCHEDULE:
15 minutes
@ 100°C
1 hour
@ 60°C
24 hours
@ 25°C
MISC PROPERTIES:
Volume Resistivity:
ohm • cm: < 40
Tensile Strength, psi:
8,500
Shrinkage Linear:
0.003 in/in
Hardness, Shore D:
85
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1)
Carefully clean and dry all surfaces to be bonded.
2)
Apply AA-CARB 61 completely mixed adhesive to the prepared surfaces, and gently press these surfaces
together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive
is completely cured
.
3)
Some separation of components is common during shipping and storage. For this reason, it is recommended
that the contents of the shipping container be thoroughly mixed prior to use.
4)
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage.
A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized
epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best
results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application