Environ Kesselanbindesystem Profimix 180 Wita Pumpengruppe

Description

Environ Kesselanbindesystem Profimix 180 Wita Pumpengruppe
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Do you have questions regarding the product? Contact our customer support.
Shop
reviews
Contact
conclusion of contract
Statutory liability for defects
General Privacy Policy
ProfiMix heating circuit pump group directly, with Wita go.future 2 25/60 LED 180 mm high-efficiency pump
Stock item, immediately available.
▸ Dimensions: 400 x 250 x 240 mm
▸ Center distance: 125mm
▸ Nominal size: DN 25 - 1”
▸ Connections: 1" IT x 1 ½ "AG
▸ Max pressure: 6 bar
▸ Medium: Usable liquids: water, glucol solutions (glucol max 50%)
▸ Pump type: Wita go.future 2 25/60 LED 180 mm high-efficiency pump
▸ Pumps mounting length: 180mm
▸ Power supply: 230V
▸ Insulation material: EPP
▸ Thermometer scale: 0-160°C
▸ Max temperature: 120°C
▸ built-in check valve ✓
▸ Insulation material: EPP 40 g/l
▸ Gasket set: EPDM
▸ Body material of the heating circuit station: brass / refined quality steel
Technical data WITA high-efficiency pump go.future 2 25/60 LED 180 mm DN 25 made in Germany:
▸ Power consumption 3 to 41 watts
▸ Maximum head: 6m
▸ Q max.: 3600 l/h
▸ max permissible housing pressure: 10 bar
▸ Degree of protection: IP42
▸ Insulation: F
▸ Supply voltage: 1~/230 V
▸ Mains frequency: 50 Hz
▸ minutes temp Of the pumped medium: +5 °C
▸ max temp The pumped medium: 110 °C (TF 110 acc. CEN 335-2-51)
▸ Impeller: technopolymer
▸ Pump housing: gray cast iron GG 25, cataphoretically coated
▸ Nominal pressure: PN 10
▸ Motor protection: None, short-circuit proof
▸ Test mark: CE
▸ Type of control: electronic
The PROFI MIX EN001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in shut-off ball valve. Forward and reverse can easily be reversed from right to left. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C) and integrated gravity brake in the flow.
If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). Servicing or replacing the circulation pump is very easy without having to drain the system. The center distance is 125mm and the dimensions of the lower connections are 1½" AG for a possible direct installation on a conventional distributor bar.
The well thought-out thermal insulation made of EPP, with a vapor barrier system, ensures an optimal climate inside the insulation, so that no heat build-up occurs. It is possible to switch from heating mode to cooling mode with a simple movement of the hand. If several pump groups from the PROFI MIX series are used, the individual insulation elements together with the distributor bar create an elegant, perfect unit.
Advantages of the ProfiMix pump group
▸ Compact pump group ready for installation
▸ Unmixed group suitable for high-temperature systems
▸ Simple reversal of flow from right to left; however, it can be retrofitted by the installer on the left; in doing so, the position of the return line and the pump and the position of the valves, according to the instructions, are reversed.
▸ Return pipe with non-return valve
▸ Secure flat-sealing connections and seals
▸ Flat-sealing flow and return ball valves with integrated thermometer
▸ Black EPP thermal insulation
scope of delivery
Ready-to-install ProfiMix heating circuit pump group directly with Wita go.future 2 25/60 LED 180 mm high-efficiency pump with mains plug
your benefits
Professional customer advice
telefonic consultancy
Top value for money
30 days return policy
Store categories
Actions
pump groups
return boosts
solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
can you us
a message
send or reach you
us personally under the
deposited on eBay
phone number.
Payment & Shipping
BAFA funding
Payment & Shipping
Safe and easy payment via PayPal, prepayment and cash on collection.
In order to be able to allocate the incoming payment more quickly, please enter your member name as a reference when making the payment.
We ship daily with DHL, all orders until 2 p.m. are shipped the same day.
BAFA funding
Attention, high-efficiency pumps are funded by BAFA.
For more information on the grant, copy and paste the URL below into your browser bar (search bar).
https://www.bafa.de/DE/Energie/energy efficiency/heating optimization/heating optimization_node.html
your benefits
Professional customer advice
telefonic consultancy
Top value for money
30 days return policy
Store categories
Actions
pump groups
return boosts
solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
can you us
a message
send or reach you
us personally under the
deposited on eBay
phone number.
You may also like
To the shop
reviews
Contact
conclusion of contract
Statutory liability for defects
General Privacy Policy
holistic-energy-concepts-online-shop
▸ Dimensions: 400 x 250 x 240 mm ▸ Center distance: 125mm ▸ Nominal size: DN 25 - 1” ▸ Connections: 1" IG x 1 ½ "AG ▸ Max pressure: 6 bar ▸ Medium: Usable liquids: water, glycol solutions (glucose max 50%) ▸ Pump type: Wita go.future 2 25/60 LED 180 mm high-efficiency pump ▸ Pump mounting length: 180mm ▸ Power supply: 230V ▸ Insulation material: EPP ▸ Thermometer scale: 0-160°C ▸ Max temperature: 120°C ▸ built-in Non-return valve ✓ ▸ Insulation material: EPP 40 g/l ▸ Sealing set: EPDM ▸ Body material of the heating circuit station: brass / refined quality steel Technical data WITA high-efficiency pump go.future 2 25/60 LED 180 mm DN 25 made in Germany: ▸ Power consumption 3 to 41 watts ▸ Maximum head: 6m ▸ Q max.: 3600 l/h ▸ Max. permissible housing pressure: 10 bar ▸ Degree of protection: IP42 ▸ Insulation: F ▸ Supply voltage: 1~/230 V ▸ Mains frequency: 50 Hz ▸ Min. temp Of the pumped medium: +5 °C ▸ Max. temp The pumped medium: 110 °C (TF 110 acc. CEN 335-2-51) ▸ Impeller: technopolymer ▸ Pump housing: gray cast iron GG 25, cataphoretically coated ▸ Nominal pressure: PN 10 ▸ Motor protection: none, short-circuit proof ▸ Test mark: CE ▸ Type of control: electronic The PROFI MIX EN001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in shut-off ball valve. Forward and reverse can easily be reversed from right to left. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C) and integrated gravity brake in the flow. If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). Servicing or replacing the circulation pump is very easy without having to drain the system. The center distance is 125mm and the dimensions of the lower connections are 1½" AG for a possible direct installation on a conventional distributor bar. The well thought-out thermal insulation made of EPP, with a vapor barrier system, ensures an optimal climate inside the insulation, so that no heat build-up occurs. It is possible to switch from heating mode to cooling mode with a simple movement of the hand. If several pump groups from the PROFI MIX series are used, the individual insulation elements together with the distributor bar create an elegant, perfect unit. Advantages of the ProfiMix pump group ▸ Compact pump group ready for installation ▸ Unmixed group suitable for high-temperature systems ▸ Simple reversal of flow from right to left; however, it can be retrofitted by the installer on the left; in doing so, the position of the return line and the pump and the position of the valves, according to the instructions, are reversed. ▸ Return pipe with non-return valve ▸ Safe flat-sealing connections and seals ▸ Flat-sealing flow and return ball valves with integrated thermometer ▸ Thermal insulation made of black EPP
Marke
Environ
Modellkompatibilität
Universell einsetzbar
Herstellungsland und -region
Deutschland
Achsabstand
125mm
Stromquelle
Netzbetrieb
Länge
Maße 400 x 250 x 240 mm
Farbe
Schwarz
Material
Messing
Produktkompatibilität
Dachheizung
Produktkompatibilität
Dachklimaanlage
Produktkompatibilität
Dual-Fuel-Split-Klimaanlage
Produktkompatibilität
Fußbodenheizung
Produktkompatibilität
Holzofen im Freien
Produktkompatibilität
Kanallose Split-Miniklimaanlage
Produktkompatibilität
Kanallose Split-Miniklimaanlage mit Wärmepumpe
Produktkompatibilität
Klima- und Heizanlage für das gesamte Haus
Produktkompatibilität
Split-Klimaanlage
Produktkompatibilität
Verdunstungskühler mit Luftkanälen
Gewicht
6 kg
Breite
Maße 400 x 250 x 240 mm
Spannung
230V
Modell
Pumpengruppe
Herstellernummer
Siehe Beschreibung
Anschlüsse
1" IG x 1 ½ " AG
Nenngröße
DN25
EAN
NichtZutreffend
Stromstärke
3600 l/h
Produktart
Kesselanbindesystem
Markenkompatibilität
Für Universal