Environ Zweiwege-Heizkreisstation, Pump Assembly With Ball Valve DN25 + Wita

Description

Environ Zweiwege-Heizkreisstation, Pump Assembly With Ball Valve DN25 + Wita
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Do you have questions regarding the product? Contact our customer support.
Shop
reviews
Contact
Conclusion of contract
Statutory liability law for defects
General data protection declaration
ProfiMix heating circuit pump group direct, with Wita go.future 2 25/60 LED 180 mm high-efficiency pump
Stock items, available immediately.
▸ Dimensions: 400 x 250 x 240 mm
▸ Center distance: 125mm
▸ Nominal size: DN 25 - 1”
▸ Connections: 1" female thread x 1 ½" male thread
▸ Max pressure: 6 bar
▸ Medium: Applicable liquids: water, Glükol solutions (Glükol max 50%)
▸ Pump type: Wita go.future 2 25/60 LED 180 mm high efficiency pump
▸ Pump assembly length: 180mm
▸ Power supply: 230V
▸ Insulation material: EPP
▸ Thermometer scale: 0-160°C
▸ Max temperature: 120°C
▸ built-in check valve ✓
▸ Insulation material: EPP 40 g/l
▸ Seal set: EPDM
▸ Body material of the heating circuit station: brass / refined quality steel
Technical data WITA high-efficiency pump go.future 2 25/60 LED 180 mm DN 25 made in Germany:
▸ Power consumption 3 to 41 watts
▸ Maximum delivery height: 6m
▸ Q max.: 3600 l/h
▸ Max. Permissible housing pressure: 10 bar
▸ Protection class: IP42
▸ Insulation: F
▸ Supply voltage: 1~/230 V
▸ Mains frequency: 50 Hz
▸ Min. Temp. Of the pumped medium: +5 °C
▸ Max. Temp. The pumped medium: 110 °C (TF 110 acc. CEN 335-2-51)
▸ Impeller: Technopolymer
▸ Pump housing: Gray cast iron GG 25 cataphoresis coated
▸ Nominal pressure: PN 10
▸ Motor protection: None, short circuit proof
▸ Test mark: CE
▸ Type of control: electronic
The PROFI MIX EN001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in shut-off ball valve. Forward and reverse can easily be reversed from right to left. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IT) with built-in thermometers (0-160°C) and integrated gravity brake in the flow.
If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in delivery). Maintaining or replacing the circulation pump is very easy without having to drain the system. The center distance is 125mm and the dimensions of the lower connections are 1½" AG for possible direct installation on a conventional distribution bar.
The well-thought-out thermal insulation made of EPP, with a vapor barrier system, ensures an optimal climate inside the insulation so that no heat build-up occurs. With a simple movement it is possible to switch from heating mode to cooling mode. If several pump groups from the PROFI MIX series are used, the individual insulation elements together with the distribution bar create an elegant, perfect unit.
Advantages of the ProfiMix pump group
▸ Compact pump group ready for installation
▸ Unmixed group suitable for high-temperature systems
▸ Simple reversal of the advance from right to left; However, it can be installed later on the left by the installer; The position of the return and the pump and the position of the valves are swapped according to the instructions.
▸ Return pipe with check valve
▸ Secure flat-sealing connections and seals
▸ Flat-sealing flow and return ball valves with integrated thermometer
▸ Thermal insulation made of black EPP
scope of delivery
Ready-to-install ProfiMix heating circuit pump group directly with Wita go.future 2 25/60 LED 180 mm high-efficiency pump with power plug
Your advantages
Expert customer advice
telefonic consultancy
Top price performance
30 days return policy
Shop categories
Actions
Pump groups
Return increases
Solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
you can contact us
a message
send or reach you
us personally at the
deposited on eBay
Phone number.
Payment & Shipping
BAFA funding
Payment & Shipping
Secure and easy payment via PayPal, advance payment and cash upon collection.
In order to allocate the incoming payment more quickly, please provide your member name as a reference when making the payment.
We ship daily with DHL, all orders placed by 2 p.m. will be shipped the same day.
BAFA funding
Attention, high-efficiency pumps are funded by BAFA.
For more information about funding, copy the URL below and paste it into your browser bar (search bar).
https://www.bafa.de/DE/Energie/EnergieENEFFICIENCY/Heizungsoptimization/heizsoptimization_node.html
Your advantages
Expert customer advice
telefonic consultancy
Top price performance
30 days return policy
Shop categories
Actions
Pump groups
Return increases
Solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
you can contact us
a message
send or reach you
us personally at the
deposited on eBay
Phone number.
You might also like
To the shop
reviews
Contact
Conclusion of contract
Statutory liability law for defects
General data protection declaration
holistic-energy-concepts-online-shop
▸ Dimensions: 400 x 250 x 240 mm ▸ Center distance: 125mm ▸ Nominal size: DN 25 - 1” ▸ Connections: 1" IT x 1 ½ " AG ▸ Max pressure: 6 bar ▸ Medium: Applicable liquids: water, Glükol solutions (Glükol max 50%) ▸ Pump type: Wita go.future 2 25/60 LED 180 mm high efficiency pump ▸ Pump assembly length: 180mm ▸ Power supply: 230V ▸ Insulation material: EPP ▸ Thermometer scale: 0-160°C ▸ Max temperature: 120°C ▸ built-in Check valve ✓ ▸ Insulation material: EPP 40 g/l ▸ Seal set: EPDM ▸ Body material of the heating circuit station: brass / refined high-quality steel Technical data WITA high-efficiency pump go.future 2 25/60 LED 180 mm DN 25 made in Germany: ▸ Power consumption 3 to 41 watts ▸ Maximum delivery height: 6m ▸ Q max.: 3600 l/h ▸ Max. Permissible housing pressure: 10 bar ▸ Protection class: IP42 ▸ Insulation: F ▸ Supply voltage: 1~/230 V ▸ Mains frequency: 50 Hz ▸ Min. Temp. Of the pumped medium: +5 °C ▸ Max. Temp. The pumped medium: 110 °C (TF 110 acc. CEN 335-2-51) ▸ Impeller: Technopolymer ▸ Pump housing: Gray cast iron GG 25, cataphoresis coated ▸ Nominal pressure: PN 10 ▸ Motor protection: None, short-circuit proof ▸ Test mark: CE ▸ Type of control: electronic The PROFI MIX EN001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in shut-off ball valve. Forward and reverse can easily be reversed from right to left. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IT) with built-in thermometers (0-160°C) and integrated gravity brake in the flow. If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in delivery). Maintaining or replacing the circulation pump is very easy without having to drain the system. The center distance is 125mm and the dimensions of the lower connections are 1½" AG for possible direct installation on a conventional distribution bar. The well-thought-out thermal insulation made of EPP, with a vapor barrier system, ensures an optimal climate inside the insulation so that no heat build-up occurs. With a simple movement it is possible to switch from heating mode to cooling mode. If several pump groups from the PROFI MIX series are used, the individual insulation elements together with the distribution bar create an elegant, perfect unit. Advantages of the ProfiMix pump group ▸ Compact pump group ready for installation ▸ Unmixed group suitable for high-temperature systems ▸ Simple reversal of the flow from right to left; However, it can be installed later on the left by the installer; The position of the return and the pump and the position of the valves are swapped according to the instructions. ▸ Return pipe with check valve ▸ Secure flat-sealing connections and seals ▸ Flat-sealing flow and return ball valves with integrated thermometer ▸ Thermal insulation made of black EPP
Marke
Environ
Modellkompatibilität
Universell einsetzbar
Stromquelle
Netzbetrieb
Länge
Abmessungen: 400 x 250 x 240 mm
Farbe
Schwarz
Stromstärke
3600 l/h
Produktkompatibilität
Dachheizung
Produktkompatibilität
Dachklimaanlage
Produktkompatibilität
Dual-Fuel-Split-Klimaanlage
Produktkompatibilität
Fußbodenheizung
Produktkompatibilität
Holzofen im Freien
Produktkompatibilität
Kanallose Split-Miniklimaanlage
Produktkompatibilität
Kanallose Split-Miniklimaanlage mit Wärmepumpe
Produktkompatibilität
Klima- und Heizanlage für das gesamte Haus
Produktkompatibilität
Split-Klimaanlage
Produktkompatibilität
Verdunstungskühler mit Luftkanälen
Gewicht
6 kg
Breite
Abmessungen: 400 x 250 x 240 mm
Spannung
230V
Modell
Environ Pumpengruppe direkt mit WITA go.future 2
Herstellernummer
Siehe Beschreibung
EAN
Nicht zutreffend
Produktart
zweiwege-Heizkreisstation
Markenkompatibilität
Für Universal