KRAFTLER Digital Caliper Measuring Tool Vernier Caliper Electronic 150mm 0-6"

Description

KRAFTLER Digital Caliper Measuring Tool Vernier Caliper Electronic 150mm 0-6"
DESCRIPTION
About This Item
150mm stainless steel digital vernier caliper for indoor, outdoor, depth and step measurements.
ACCURACY: Resolution: 0.01 mm; Accuracy: 0.01mm ( 100mm).
With a large high-contrast LCD display, switching from mm to inch possible.
Zero switch for resetting the measured value for partial sections, very accurate and easy-to-use digital caliper.
BONUS: one replacment battery CR2032, screwdriver to open the battery compartment lid; custom fit storage case.
Technical specifications:
Measuring range: 0-150 mm/0-6 in.
Resolution: 0,01 mm/0,0005 in.
Accuracy: ± 0,02 mm/0,001 in (<100 mm)
± 0,03 mm/0,001 in (>100-200 mm)
± 0,04 mm/0,0015 in (>200-300 mm)
Repeatability: 0,01 mm/0,0005 in.
Max measuring speed: 1,5 m/sek., 60 in/sek.
Measuring system: Linear capacitive measuring system.
Display: LCD display
Power: One silver oxide battery 3 V, type CR2032. Capacity: 165mAh.
Working temperature: 5 °C-40-C/A1 to 104 degree F
Influence of humidity: Not important under 80% of relative humidity
Preparations:
Slider can be moved only after the locking screw is loosened.
Wipe all the measuring faces and clean caliper, using a damp cloth.
Check to see if all the buttons, switches and the LCD display respond well.
Basic measuring methods:
Loosen the locking screw.
Switch the unit on with a press on “ON” button.
Then select the unit system needed by pressing Inch! Metric button. (Each time the button is pressed, inch and metric digits will be displayed alternatively).
Apply normal measuring pressure on slider to close the external measuring jaws. Then press “Zero” button to reset the display to zero.
Maintenance instructions:
Keep the caliper clean and dry (Liquid can damage the slider).
Faces should be cleaned gently with cotton fabrics. Never use petrol, acetone and other organic solutions.
In order to save power, turn off the unit when caliper is going to stay idle for so me time.
Never apply any electric pressure on any part of the caliper and never use an electronic pen so not to damage ist' chip.
Battery replacement:
Flashing of digits shows a flat battery. Take off the battery cover in the direction shown by the arrow and replace the battery (positive
side facing up).
SHIPPING
Domestic Shipping
Shipping
: Free domestic shipping to most addresses in the lower 48 states. Our stock ships from our US-based warehouses in different locations/states.
International Customers:
International customers are responsible for all import duties and taxes.
RETURNS
Free Returns
Return is by eBay policy. Please contact us for RMA and FREE return label before returning the item to avoid shipping return to the wrong address.
Returns are not accepted after the 30-day of receiving the item
*******************************
Electronic Products:
Note for International Buyers
Please Note:
Our electronic products are manufactured according to the specifications of the US Electrical Standards and Codes. We do not recommend the use of this product outside of the USA.
We do not assume responsibility if this product does not work, malfunctions or causes an accident when the product is used with foreign electrical standards. The use of this product outside of the USA is at the buyer's own risk.
CUSTOMER SATISFACTION & FEEDBACK
Trust is important to us so we'll work with you to guarantee your satisfaction!
If you have any questions please contact us through "
Contact Seller
" link. We will respond within 1-2 business days or less.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.