PC Products 87770 PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste,

Description

Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
Fills holes, castings, and molds
Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
Product Description
PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more. Work time (70 degree F): 60 minutes. Tack free cure time: 160 minutes. Cure for service: 24 hours. Maximum cure: 7 day. Gardner impact resistance: 160 in./Lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.