PES 102 POWER METAL FLUID 1KG = 3M METAL SURFACER FG 502 & BELZONA 1821

Description

www.pes-solutions.com
PES 102 Power Metal Repair Fluid - 1KG
102 Metal Repair Fluid
is a two component solvent free epoxy metal fairing compound. The product has been designed for use on a wide range of metallic surfaces and once cured is readily machinable.
The product is suitable for filling mechanically or abrasive blast cleaned surfaces where excessive pitting and scarring has been caused by corrosion or chemical attack. The material can also be used with aluminium oxide aggregates to create anti-slip finishes on metallic surfaces such belt rollers, brake test rollers and steps
Main characteristics -                                                                    Mechanical Properties ?
Two component
Adhesion
Solvent free epoxy                                                                           Tensile Shear to ASTM D1002           2630psi           (185kg/cm²)
Usable life 25 minutes @ 68°F (20
°
C)
Compressive strength
Touch dry 1 hour @ 68° (20
°
C)                                                       Tested to ASTM D 695                   15,300psi              1075kg/ cm²  machinable 2 hours @ 68°F(20
°
C)
Corrosion Resistance
100 Rockwell R Hardness (Once fully cured)                                Tested to ASTM B117                     Minimum 5000 hours
Applied by brush or applicator tool
Flexural Strength
Available in 1kg, 2kg, 3kg, & 30kg pack sizes                               Tested to ASTM D790                       10,000psi           703kg/cm²
Heat Resistance
Suitable for water immersion up to 158°F (70°C) and intermittent contact with steam up to 248°F (120°).  Dry heat resistance up to 392°F (200°C).