-40%
Pump Assembly Heating Circuit 3 Way Mixer Grundfos UPM3 Hybrid Heizkreisregelung
$ 337.34
- Description
- Size Guide
Description
Pump Assembly Heating Circuit 3 Way Mixer Grundfos UPM3 Hybrid HeizkreisregelungThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Do you have questions regarding the product? Contact our customer support.
To the shop
reviews
Contact
conclusion of contract
Statutory liability for defects
General Privacy Policy
Heating circuit pump group with three-way mixer, ESBE ARA661 actuator and GRUNDFOS UPM3 HYBRID 25/7 with Clima600 weather-compensated controller
Stock item, immediately available.
The ECOMIX ENH001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in three-way brass mixer and an ESBE ARA661 electric actuator. A GRUNDFOS UPM3 HYBRID 25/7 high-efficiency pump is installed. Forward and reverse can easily be reversed from right to left. In the upper area of the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). Servicing or replacing the circulation pump is very easy without having to drain the system. The well thought-out thermal insulation made of EPP ensures an optimal climate inside the insulation, so that no heat build-up occurs. If several pump groups from the ECOMIX series are used, the individual insulation elements together with the distributor bar create an elegant, perfect unit.
Technical specifications:
▸ Flow rate 1,600 l/h Max.
▸ Temperature 110 °C
▸ max pressure 6 bars
▸ minutes Temperature 10°C Kvs 8.3
▸ Ball valves Brass CW617N
▸ Insulation material EPP 38 g/l
▸ Thermal conductivity (λ 40”C) 0.038 W/mK
▸ Fire protection class ISO 3795
▸ EPDM sealing set
▸ Consumer connections 1”IG
▸ System connections 1”½ AG
Technical data Wilo Para STG 25/8-75:
▸ Delivery height max.: 7.2m
▸ Flow rate max.: 3.8m³/h
▸ Medium temperature: max. 110°C
▸ Ambient temperature: 0°C...55°C
▸ Operating pressure: max. 10 bar
▸ Installation length: 130 mm
▸ Power : 2W-52W
▸ Switching stages: regulated
▸ el. Connection: 230V/50HZ
▸ Insulation class: F
your benefits
Professional customer advice
telefonic consultancy
Top value for money
30 days return policy
Store categories
Actions
pump groups
return boosts
solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
can you us
a message
send or reach you
us personally under the
deposited on eBay
phone number.
Clima600 control
Grundfos UPM3 Hybrid 25-7
Payment & Shipping
Clima600 control
The Clima 600 is a weather-compensated heating controller for systems with water-bearing stoves or wood boilers, buffer storage and mixed heating circuits. Weather-compensated Clima 600 controllers are used to regulate the direct heating circuit, 1 or 2 mixer heating circuits, the heating of buffer storage or service water heating using boilers, water-bearing stoves, solar collectors and other energy sources. In addition, an additional heat generator (e.g. LT boiler) can be requested via the Clima 600. Select the appropriate investment scheme from the following description. The individual parameters are set via the menu navigation. The mixer is in the “CLOSED” position when it is put into operation for the first time. This is set automatically after entering the appropriate parameters. In the event of a power failure, the values remain saved.
Important features of CLIMA600
• Representation of graphics and texts in the illuminated display
• Simple query of the current measured values
• Extensive setting menus
• Menu lock to prevent unintentional changes
Scope of delivery:
+ Clima 600 control
+ surface box
+ Screws and dowels for a clean installation
+ The sensor sets vary depending on the system scheme, which you can select above.
+ All clamps are removable and very well made (handmade)
Let our specialized customer support advise you individually when setting the controller.
If necessary, all values and parameters can be adapted to your system by our customer support and your help.
Grundfos UPM3 Hybrid 25-7
The UPM3 HYBRID is the first Grundfos high-efficiency circulator that is suitable for both external and internal control.
These circulators with control panel are designed for various uses such as: e.g.:
* Internally regulated, the pump can be used in heating systems either as an external pump or as a replacement pump, e.g. B. be used in connection groups.
* Externally controlled, the pump can be used in boilers or other heating devices where the pump speed is controlled by a PWM signal.
* As a combination of both variants, use as a universal circulation pump is possible. The internally controlled versions can be used for the following systems:
* Systems with a constant or slightly variable volumetric flow, e.g. B. One-pipe heaters
* Systems with variable volume flow, e.g. B. Two-pipe heating systems with thermostatic valves for radiators or underfloor heating circuits.
In addition, the speed can be controlled by a PWM (pulse width modulation) signal. (externally controlled via PWM profile A/C or internally controlled via PP/CP/CC/AA)
The glandless pump has a ceramic shaft, stainless steel rotor housing, compound impeller, all of which contribute to long service life. The pump is self-priming and has easy control mode selection.
The compact design fits in the most common installations and boilers. The pump and motor form a unit without a shaft seal. This means that the bearings are lubricated by the pumped liquid. This design ensures maintenance-free operation. The pump housing is made of gray cast iron and is electroplated to improve corrosion resistance.
There are up to 5 different control modes and up to 4 control curves each, available in both the 5m and 7m versions of the UPM3 HYBRID.Features:
- 3 constant curves / constant speed
- 3 proportional curves
- 4 constant pressure characteristics with fixed setting of the delivery head (4/5/6 or 7m)
- Radiator (radiator) heating mode
- Floor heating mode
- PWM profile for heating applications
- Energy-optimized, corresponds to the ErP directive
- Unlocking screw on the front for detaching the motor shaft.
- Runs reliably and efficiently even under the most difficult conditions
- Adjustable and flexible built-in connector with two possible cable glands.
- no maintenance required
- Quiet operation
- easy construction
Payment & Shipping
Safe and easy payment via PayPal, prepayment and cash on collection.
In order to be able to allocate the incoming payment more quickly, please enter your member name as a reference when making the payment.
We ship daily with DHL, all orders until 2 p.m. are shipped the same day.
your benefits
Professional customer advice
telefonic consultancy
Top value for money
30 days return policy
Store categories
Actions
pump groups
return boosts
solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
can you us
a message
send or reach you
us personally under the
deposited on eBay
phone number.
You may also like
To the shop
reviews
Contact
conclusion of contract
Statutory liability for defects
General Privacy Policy
holistic-energy-concepts-online-shop
The ECOMIX ENH001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in three-way brass mixer and an ESBE ARA661 electric actuator. A GRUNDFOS UPM3 HYBRID 25/7 high-efficiency pump is installed. Forward and reverse can easily be reversed from right to left. In the upper area of the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). Servicing or replacing the circulation pump is very easy without having to drain the system. The well thought-out thermal insulation made of EPP ensures an optimal climate inside the insulation, so that no heat build-up occurs. If several pump groups from the ECOMIX series are used, the individual insulation elements together with the distributor bar create an elegant, perfect unit. Technical data: ▸ Flow rate 1,600 l/h Max. ▸ Temperature 110 °C ▸ Max. pressure 6 bar ▸ min. Temperature 10 °C Kvs 8.3 ▸ Ball valves Brass CW617N ▸ Material insulation EPP 38 g/l ▸ Thermal conductivity (λ 40"C) 0.038 W/mK ▸ Fire protection class ISO 3795 ▸ Sealing set EPDM ▸ Consumer connections 1"IG ▸ Connections system 1 ”½ AG Technical data Wilo Para STG 25/8-75: ▸ Delivery head max.: 7.2m ▸ Delivery rate max.: 3.8m³/h ▸ Medium temperature: max. 110°C ▸ Ambient temperature: 0°C...55°C ▸ Operating pressure: max. 10 bar ▸ Installation length: 130 mm ▸ Power: 2W-52W ▸ Switching stages: controlled ▸ el. Connection: 230V/50HZ ▸ Insulation class: F
The ECOMIX ENH001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with built-in three-way brass mixer and an ESBE ARA661 electric actuator. A GRUNDFOS UPM3 HYBRID 25/7 high-efficiency pump is installed. Forward and reverse can easily be reversed from right to left. In the upper area of the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). Servicing or replacing the circulation pump is very easy without having to drain the system. The well thought-out thermal insulation made of EPP ensures an optimal climate inside the
Marke
Environ
Modellkompatibilität
Universell
Achsabstand
125mm
Stromquelle
Hybrid
MPN
46742
Farbe
Schwarz
Material
Messing
Produktkompatibilität
Zentralheizung
Produktkompatibilität
Fußbodenheizung
Markenkompatibilität
Für Wilo
Markenkompatibilität
Für Universal
Markenkompatibilität
Für Danfoss
Markenkompatibilität
Für Grundfos
Markenkompatibilität
Für Buderus
Modell
Environ ProfiMix Pumpengruppe
Herstellernummer
46742
Herstellungsjahr
2020
