Quiksteel Quicksteel Steel Reinforced Epoxy Putty kit 5pcs Metal Repair Weld 28g

Description

Universal Epoxy Putty kit (5pcs)
You will get:
Epoxy Putty - 1stick 28g
Small sheet of sandpaper (P80)
Alkohol Pre pad
Plastic spatula
Masking tape
Sets hard within 15 to 30 minutes, even under water, achieving a full chemical cure within 60 minutes
Impervious to petrol, diesel, oil and battery acid
Permanently bonds to aluminium, brass, copper, steel, PVC, fibreglass, plastics, glass, wood and more
-70 to +260C temperature resistant and drinking water safe
Complete Kit
Seals Small Holes, Leaks & Weak Seams
Hardens Like Steel
Permanent
How to use?
1.
Before applying to the smooth surface, lightly sand the surface with the sanding paper.
2.Surface to be repaired must be clean, dry and dust free. Clean with an alcohol wipe. Put on plastic gloves.
3.Using knife, cut off the required amount of epoxy putty.
4.Using wet fingers knead the epoxy putty together until a uniform feeling is achieved.
5.Immediately apply mixed product to the repair area using wet fingers to work putty into repair area. Use wet fingers
to smooth texture.
Remove excess epoxy with wet spreader before epoxy hardens. Hardens in 5 minutes.
6.After 60 minutes, wet sand as necessary using the sanding sponge.