-40%
Return Flow Increase 140°F With Grundfos UPM3 Hybrid And Clima TDS503 Control
$ 250.37
- Description
- Size Guide
Description
Return Flow Increase 140°F With Grundfos UPM3 Hybrid And Clima TDS503 ControlThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Do you have questions regarding the product? Contact our customer support.
To the shop
reviews
Contact
conclusion of contract
Statutory liability for defects
General Privacy Policy
Environ THERMOREFLUX X60 return flow increase with heart fixed value thermostat 60°C with Grundfos UPM3 Hybrid and ClimaTDS 503 controller
Stock item, immediately available.
The THERMOREFLUX X60 pump group is a ready-to-install, compact return flow increase / charging valve unit for
Maintaining the boiler and return temperature for all common boiler sizes from 5kW to 50kW nominal output. Thermally controlled with built-in three-way brass mixer. A Grundfos UPM3 Hybrid 25/7 high-efficiency pump is installed. In the upper area of the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). The well thought-out thermal insulation made of EPP ensures an optimal climate inside the insulation, so that
no heat build-up occurs.
Technical specifications:
▸ Flow rate: 1,050 l/h
▸ max Temperature: 110°C
▸ max Pressure: 6 bars
▸ minutes Temperature: 10°C
▸ Kvs: 3.2
▸ Setting range: 25 ÷ 55
▸ Ball valves Brass: (CW617N)
▸ Insulation material: EPP 40g/l
▸ Thermal conductivity: (λ 40”C) 0.038 W/mK
▸ Fire protection class: ISO 3795
▸ Gasket set: EPDM
▸ Consumer connections: 1” IG
▸ System connections: 1”½ AG
ClimaTDS 503:
The temperature differential controller for water-bearing stoves and boilers. The Clima TDS 503 solid temperature differential controller offers everything your water-bearing stove or wood gasification boiler needs for safe and long-term system operation. Clima TDS 503 solid monitors and controls water-bearing stoves or wood-fired boilers with a memory. In addition to loading the storage tank, the controller also assumes important system monitoring and safety functions. System parameters and measured values can be viewed and changed via the display. Clima TDS 503 has three inputs for temperature measurement. System operational safety is supported by well thought-out error diagnostics.
Important features of Clima TDS 503
▸ Representation of graphics and texts in the illuminated display
▸ Simple query of the current measured values
▸ Extensive setting menus
▸ Menu lock to prevent unintentional adjustment
Technical specifications
▸ Mains voltage: 230 Vac 50 Hz
▸ Power consumption: 2 VA
▸ Relay output power: 5A 250 Vac
▸ Internal fuse: 3.15 A
▸ Degree of protection: IP40
▸ Sensor inputs: PT1000
▸ Measuring range: -40 ÷ 300 °C
scope of delivery
✓ 1x Clima TDS 503 solid
✓ 4x screws
✓ 2x fastening screws control
✓ 1x up or flush-mounted box
✓ 1x aperture
✓ 1x assembly and operating instructions
✓ 3x Pt 1000 sensors
mechanical properties
▸ Plastic ABS housing design
▸ Installation options: surface or flush mounting
▸ Dimensions: 160mm x 90mm x 58mm
▸ Display: BackLight 128 x 64 dots
your benefits
Professional customer advice
telefonic consultancy
Top value for money
30 days return policy
Store categories
Actions
pump groups
return boosts
solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
can you us
a message
send or reach you
us personally under the
deposited on eBay
phone number.
Technical data Grundfos UPM 3 Hybrid 25/7:
Payment & Shipping
Technical data Grundfos UPM 3 Hybrid 25/7:
▸ Delivery height max.: 7.2m
▸ Flow rate max.: 3.8m³/h
▸ Medium temperature: max. 110°C
▸ Ambient temperature: 0°C...55°C
▸ Operating pressure: max. 10 bar
▸ Installation length: 130 mm
▸ Power : 2W-52W
▸ Switching stages: regulated
▸ el. Connection: 230V/50HZ
▸ Insulation class: F
Payment & Shipping
Safe and easy payment via PayPal, prepayment and cash on collection.
In order to be able to allocate the incoming payment more quickly, please enter your member name as a reference when making the payment.
We ship daily with DHL, all orders until 2 p.m. are shipped the same day.
your benefits
Professional customer advice
telefonic consultancy
Top value for money
30 days return policy
Store categories
Actions
pump groups
return boosts
solar technology
Science of measuring and control engineering
Heating with wood & pellets
Questions & Contact
For further questions,
can you us
a message
send or reach you
us personally under the
deposited on eBay
phone number.
You may also like
To the shop
reviews
Contact
conclusion of contract
Statutory liability for defects
General Privacy Policy
holistic-energy-concepts-online-shop
The THERMOREFLUX X60 pump group is a ready-to-install, compact return riser/charging valve unit for maintaining the boiler and return temperature for all common boiler sizes from 5kW to 50kW nominal output. Thermally controlled with built-in three-way brass mixer. A Grundfos UPM3 Hybrid 25/7 high-efficiency pump is installed. In the upper area of the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). The well thought-out thermal insulation made of EPP ensures an optimal climate inside the insulation, so that no heat build-up occurs. Technical data: ▸ Flow rate: 1,050 l/h ▸ Max. Temperature: 110 °C ▸ Max. Pressure: 6 bar ▸ Min. Temperature: 10 °C ▸ Kvs: 3.2 ▸ Adjustment range: 25 ÷ 55 ▸ Brass ball valves: (CW617N) ▸ Insulation material: EPP 40g/l ▸ Thermal conductivity: (λ 40”C) 0.038 W/mK ▸ Fire protection class: ISO 3795 ▸ Sealing set: EPDM ▸ Consumer connections: 1” IG ▸ System connections: 1”½ AG ClimaTDS 503: The temperature difference controller for water-bearing stoves and boilers. The Clima TDS 503 solid temperature differential controller offers everything your water-bearing stove or wood gasification boiler needs for safe and long-term system operation. Clima TDS 503 solid monitors and controls water-bearing stoves or wood-fired boilers with a memory. In addition to loading the storage tank, the controller also assumes important system monitoring and safety functions. System parameters and measured values can be viewed and changed via the display. Clima TDS 503 has three inputs for temperature measurement. System operational safety is supported by well thought-out error diagnostics. Important features of Clima TDS 503 ▸ Representation of graphics and texts in the illuminated display ▸ Simple query of the current measured values ▸ Extensive setting menus ▸ Menu lock to prevent unintentional adjustment Technical data ▸ Mains voltage: 230 Vac 50 Hz ▸ Power consumption: 2 VA ▸ Relay output power: 5A 250 Vac ▸ Internal fuse: 3.15 A ▸ Degree of protection: IP40 ▸ Sensor inputs: PT1000 ▸ Measuring range: -40 ÷ 300 °C Scope of delivery ✓ 1x Clima TDS 503 solid ✓ 4x screws ✓ 2x fastening screws Control ✓ 1x mounting or Flush-mounted box ✓ 1x panel ✓ 1x assembly and operating instructions ✓ 3x Pt 1000 sensor Mechanical properties ▸ Housing design plastic ABS ▸ Installation options: surface or flush mounting ▸ Dimensions: 160mm x 90mm x 58mm ▸ Display: BackLight 128 x 64 dots
The THERMOREFLUX X60 pump group is a ready-to-install, compact return riser/charging valve unit for maintaining the boiler and return temperature for all common boiler sizes from 5kW to 50kW nominal output. Thermally controlled with built-in three-way brass mixer. A Grundfos UPM3 Hybrid 25/7 high-efficiency pump is installed. In the upper area of the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). If the pump group is installed individually, a wall bracket can be screwed to the shut-off valves (not included in the scope of delivery). The well thought-out thermal insulation made of EPP ensures an optimal climate inside the insulation, so that no heat build-up occurs. Technical data: ▸ Flow rate: 1,050 l/h ▸ Max. Temperature: 110 °C ▸ Max. Pr
Marke
Environ
Modellkompatibilität
Siehe Beschreibung
Stromquelle
Hybrid
Länge
Siehe Beschreibung
Farbe
Schwarz
Stromstärke
Siehe Beschreibung
Produktkompatibilität
Rücklaufanhebung
Gewicht
6 kg
Breite
Siehe Beschreibung
Spannung
230 V
Modell
ThermorefluxX Rücklaufanhebung
Herstellernummer
46742
EAN
4260447196452
Produktart
Rücklaufanhebung mit Steuerung
Markenkompatibilität
Universell
