Upgraded Pocket Hole Jig Set Aluminum Carpenter Hardware tool Accurate 9.5mm

Description

Description: This Oblique Hole Drill, Fixed Plate And Punching Are Only Operated On The Same Side Of The Plate. The Opening Is Convenient, Accurate And Fast. It Can Be Used Both Horizontally And Vertically. The Large Plate And Small Plate Can Easily Punch Holes. The Tools Are Not Deformed, And The Opening Angle Is Accurate, Convenient, Fast And More Comfortable. Specifications: Material :  Die Steel / Aluminum / Stainless Steel / Rubber And Plastic Applicable Crowd: Professional Home Decoration Carpenters, Carpenters And Craftsmen  Weights&Dimensions Product Size:19.6*6*10.6cm/7.7*2.4*4.2in Packing Size: 28*20*9.5cm Net Weight:2.2kg Gross Weight:2.3kg Aperture: 9.5mm/0.374in Packing List: 1x  Pocket Hole Jig Kit
Description:
This Oblique Hole Drill, Fixed Plate And Punching Are Only Operated On The Same Side Of The Plate. The Opening Is Convenient, Accurate And Fast. It Can Be Used Both Horizontally And Vertically. The Large Plate And Small Plate Can Easily Punch Holes. The Tools Are Not Deformed, And The Opening Angle Is Accurate, Convenient, Fast And More Comfortable.
Specifications:
Material :  Die Steel / Aluminum / Stainless Steel / Rubber And Plastic
Applicable Crowd: Professional Home Decoration Carpenters, Carpenters And Craftsmen
Weights&Dimensions
Product Size:19.6*6*10.6cm/7.7*2.4*4.2in
Packing Size: 28*20*9.5cm
Net Weight:2.2kg
Gross Weight:2.3kg
Aperture: 9.5mm/0.374in
Features:
Different Spacing For Easy Selection: The Appropriate Hole Spacing Can Be Selected According To The Actual Work Needs.
The Handle Of The Inclined Hole Device Is a Plastic Handle, Which Does Not Hurt Hands, More Comfortable, Convenient And Fast; Gourd Shape, More Suitable For Finger Grip.
The Quick Chuck Is Made Of Stainless Steel And Elastic Rubber, And The Splint Is Stable Without Damaging The Splint.
It Adopts Thickened Cast Iron Fast Clamp, Which Is More Stable, Accurate And Convenient.
The Accessories Are Fixed With Stainless Steel Hexagon Screws And Will Never Rust.
Base Fixing Hole: It Is Convenient To Fix The Inclined Hole Device On The Wooden Board Or Woodworking Table.
Packing List:
1x  Pocket Hole Jig Kit
Warm Note:
If The Inclined Hole Device Is Not Used For a Long Time, Please Wipe It Clean. It Is Best To Wipe Some Oil On The Sliding Block + Drill Bit + Limit Ring.
Due To The Lighting Effect Of The Product, The Picture Color Is Slightly Different From The Real Object. Please Understand.
Please Allow An Error Of 1-3cm Due To Manual Measurement.
Please Do Not Hesitate To Contact Our Customer Service If You Have Any Problems During The Installation And Use Of The Product.
Installation
1. Adjust The Scale Corresponding To The Inclined Hole Module According To The Plate Thickness.
2. Adjust The Height Of The Drill Bit And Fix The Limit Ring.
3. Clamp The Board, Put The Drill Into The Hole And Touch The Board (Do Not Start The Electric Drill).
4. Raise The Drill Bit By 5mm (The Drill Bit Cannot Start The Electric Drill Against The Board)
5. Start The Electric Drill To a Certain Rotation (About 500-1500 Revolutions)
6. Slow Down The Advanced Speed. When The Front Fine Bit Enters Half Or All, The Drilling Speed Can Be Accelerated.
On Mar-28-22 at 01:28:16 PDT, seller added the following information: